mustang bass-5

Mustang Bass

I wanted to make a Mustang bass in black and yellow with a shorter scale (30,292 inches). I was quite lucky to get hold of a 1969 Mustang to be able to measure it from top to toe, and from there make the tweaked templates.

making mustang bass

making the templates with my mate Ilkka

making mustang bass-2

Apart from templates, you also have to make several jigs to make it easier to do some tasks, for example cutting the slot for the saddle. Many jigs will serve you for several different designs, but some are just for one purpose only.

making mustang bass-3

My plan was to make a vintage feeling bass that was as close to the original as possible, so I chose alder for the body, maple for the neck and rosewood for the fingerboard. The neck radius is 7,25″ and for frets, I picked Dunlop 6105, which are medium width and fairly tall.

making mustang bass-4

The neck of the original felt chunky, but comfy,  for a small bass so I made it similar. It sure feels like an old-school C shaped neck without it diving towards the floor all the time.

making mustang bass-5

The hardware had to be as original as the rest, so no high mass bridges or lightweight tuners etc. So for the bridge, I chose a Squier Mustang Bass bridge and the tuners Gotoh, both in chrome to go nicely with the black body.

making mustang bass-6

The colour, as mentioned, is black with bright yellow speed stripes. The stripes, that were featured on the original as well, were so-called Competition Finishes and were issued in 1969. I didn’t use paint to achieve the colour, but several layers of stain mixed with polyurethane.

making mustang bass-7

The Harakka logo was then cut out by hand, all the way to the wood, and the filled drop by drop with polyurethane to form a sort of a window. It was then levelled with the rest and polished to a hi-sheen.

making mustang bass-8

Doing the final setup is interesting in many ways, it is then when you finally find out if all the proceeding steps have been a success or a failure. With this Mustang I can gladly say it sounds even better than I thought it would. Being a bass player myself, and having always prefered 34″ scale instruments, the Mustang surprised me with a very punchy, in your face type of sound. And not lacking in sustain at all.

making mustang bass-9

Almost ready!

Sunbathing in December in Finland is only for very special basses.

mustang bass-5

mustang bass-3

mustang bass

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.